Accurate control of Vibratory Linear Feeders and Bowl Feeders can be achieved with the R3 and R5 stabilised controllers from Enmin.
Most electromagnetic Vibratory Feeders will benefit from the stabilised circuits allowing smooth progressive control of feeding or metering of material.
The electronic circuit must be capable of handling voltage fluctuations, interferences from adjacent machinery, excessive vibrations and be housed in an IP rated plastic or metal enclosures. The R3 and R5 series presents internal trim pots for sweep adjustments, provision for no voltage OP switching, current limiting overload control and a choice of ramp times for acceleration changes.
These standard models are available for up to 6.0 amp loads, in 50 and 60 Hz versions with 240 volt power. External power light indicator, on/off switching and a 0 to 100% non-stepped sweep control all on the enclosures.
Enmin
03 9753 3633
comments: 0
Post a Comment